Baumer IO-Link RR30 Інструкція з експлуатації - Сторінка 22

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Baumer IO-Link RR30. Baumer IO-Link RR30 40 сторінок. Radar sensor

Disruption Filter

4.6.2

This filter allows you to ignore interfering objects when passing through the measuring range either cyclic or

non-cyclic. This function depends on two parameters

Parameter name

Process Value Disruption

Filter.Maximum perturbation

time

Process Value Disruption

Filter.Distance

Region of Interest (ROI)

4.6.3

The region of interest is the space (in mm) in which the sensor performs. If a signal is detected in this region,

the data will be processed and the result displayed. All signals, even if detected by the sensor, being out of

this region are not processed and displayed further on. The ROI is not necessary the same as the analog

output region. But the analog one has to be inside the bounders of the ROI. See 4.8.2.

en_BA_RR30_IO-Link_V0.23.docx

13.01.2021/

Short Description

Duration (in units of time) until a

signal (as defined in the

parameter . Distance) becomes

visible at the output.

Distance deviations from the

current measured value which

are ignored, if shorter than the

period set by the parameter

"Process Value Disruption Filter

Maximum perturbation time".

22/40

Rights

Unit / Allowed values

Limits: 0 to 1000.000 ms

Default: 200 ms

Limits 5 to 10.000 mm

Default: 300 mm

Frauenfeld, Switzerland

Baumer Electric AG