Baumer O200 Інструкція з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Baumer O200. Baumer O200 34 сторінки. Sensors with io-link

Друкувати сторінку

4.3 Configuration - Switching Signal Channel (SSC)

The sensor features two different switching channels. Switching Signal Channel SSC1 is reserved for object

detection.

Switching Channel 4 includes a counter function with an auto-reset. All switching channels can be adjusted

individually via IO-Link. All switching channels can be mapped to the MDC as well. Then they will show the

counts detected by the channel.

For more information about how to set-up the Counter/SSC4 channel and its behavior, please see section

4.3.4.

Setpoints SP

4.3.1

Using this parameter the user can modify the switchpoint of the sensor by enter the intensity (O200.R) or

distance value (O200.G, O200.S) at which the sensor should switch (teach-by-value function). Figure 4

shows the illustration of the switching behavior. Regarding Single point mode only SP1 is relevant, SP2 is

not active.

For the Window mode SP1 & SP2 are active. The switching modes are explained in section

Window mode is only available for the SSC1 of O200.G and for the SSC4/Counter.

Figure 4 Single Point Mode (O200.R, O200.G)

SP1: Switch point 1

SP2: Not active

Figure 6 Single Point Mode (O200.S)

SP1: Reference/backgroundposition

Parameter name

SSC1 Param.SP1

SSC1 Param.SP2

(Only O200.G)

SSC1

Param.Background

Tolerance

en_BA_O200_IO-Link_V1.docx

15.08.2018/

Short Description

Defines the value at which the related SSC is set to active (or

inactive if inverted) or the position of the reference (O200.S)

Defines the value at which the related SSC is set to inactive (or

active if inverted)

only active if SSC is set to window mode

Only available for O200.S

This value in % states the relative allowable variance of the

reference position. (+/-)

Figure 5 Window Mode (Only O200.G or SSC4)

SP1: Switch point 1

SP2: Switch point 2

11/34

Rights

Unit /

Allowed

values

Baumer Electric AG

Frauenfeld, Switzerland