Baumer O200 Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Baumer O200. Baumer O200 34 сторінки. Sensors with io-link

Bit 8 to 15: Scale

Value is the exponent to the power of ten, applicable to the value of the Measurement Data Channel (MDC)

Example:

Value of MDC 1000

Unit

Scale

Means

As O200 sensors only provide measuring values where no scale factor is required, the scale factor is set

fixed to 0 (zero).

Bit 16 to 31: MDC / Measurement Value

MDC stands for measurement data channel. Via this channel the distance value or the switch counts of

SSC1 or 4 can be read out as 16 bit integer value. See section 4.2 to learn how to configure the MDC.

Process Data-Out

3.2.2

This data is cyclically sent from the master to the sensor (MasterSensor).

Bit 0: Disable Transmit LED

If set to true, the transmition LED is deactivated. The sensor will not deliver a measurement or switching

value. This can be useful to measure neighbouring sensors sequentially or to perform functional tests.

Bit 1: Find Me Function

Signalling e.g. by flashing LEDs on the sensor to locate and physically identify a sensor in a machine or

system. The signalling can be triggered, for example, from the engineering tool of the controller.

en_BA_O200_IO-Link_V1.docx

15.08.2018/

-6

m or 1000 m

1000*10

-6

IO-Link Process Data Output

Bit:

Find Me (Localization: LEDs

flashing)

8/34

Disable

Transmit LED

Baumer Electric AG

Frauenfeld, Switzerland