Baumer OM30 Посібник з експлуатації - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари Baumer OM30. Baumer OM30 48 сторінок. Laser distance sensors
Друкувати сторінку
Baumer
Process data name
Bit 16 to 47: Measurement value
(MDC)
I
MDC = Measurement Data Channel
Parameters
Parameters are acyclic data (transmission occurs as needed). The following parameters are
available for the sensor:
Filters for smoothing the signal characteristics
n
Triggers for recording the measured value
n
Processing of invalid measured values
n
Switching points
n
Polarity (output level of the switching output)
n
Hysteresis
n
Zero position
n
Limits of the measurement range
n
Limits of the analog measurement field
n
Output & LED (alarm/switching output)
n
Configuration of the Teach button
n
Diagnostic data
The diagnostic data is used for monitoring the status of the device. The following diagnostic
data is available for the sensor:
Measurement rate
n
Reply delay
n
Exposure reserve
n
Signal quality
n
Device status
n
Operating time
n
Histogram function
n
A detailed description of the IO-Link functions is found in the operating manual.
For a detailed description of the IO-Link functions, see
tion of the diagnostic data, see
OM20/OM30 | V1
Description
Example:
n
▪ Measurement value (MDC): 1000
▪ Scale: -6
▪ Unit: m
▪ Therefore: 1000 × 10
Measured value
n
Diagnostic data
[} 37].
Operating Manual
-6
× m = 1000 µm
Functions
[} 22]. For a detailed descrip-
Description
|
3
15