Baumer OM30 Посібник з експлуатації - Сторінка 37

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари Baumer OM30. Baumer OM30 48 сторінок. Laser distance sensors

Baumer

Diagnostic data

The diagnostic data is used for monitoring the status of the device. You can monitor both the

momentary status (via parameters) as well as the development over time (via a histogram func-

tion).

9.1

The measurement rate is equivalent to the number of measurements per second. Example:

With a measurement rate of 500 Hz, a measurement takes place every 0.002 s (1/

500 Hz = 0.002 s). The measurement rate is useful for the following questions, among others:

How quickly can a change in distance be detected?

How many measurements can be performed on a static object?

For particularly dynamic applications, always consider the measurement rate together with the

filter settings

The measuring frequency value depends on the exposure time. The sensor automatically ad-

justs its exposure time to the measured object in order to always receive an optimum light quan-

tity and thus achieve a sufficient exposure reserve. The exposure time depends on the proper-

ties of the measured surface (color/structure, etc.) and the alignment of the sensor to the mea-

sured object. Dark measurement objects reflect less light and thus need longer exposure times

than light-colored objects, decreasing the measuring frequency. The measurement and change

of the output always take place with the same frequency.

INFO

The maximum speed for dynamic applications is limited by the measurement rate. Filter settings

do not affect the measurement rate.

IO-Link diagnostic data: Measurement rate

Name

Measurement Values. PV1 Rate

OM20/OM30 | V1

(Filter

[} 22]).

Description

Output of the measuring rate.

Operating Manual

Diagnostic data