Com-Power ACS-230-25W Інструкція з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Підсилювач Com-Power ACS-230-25W. Com-Power ACS-230-25W 15 сторінок.

Important Safety Precautions

Safety Symbol Guide

 Do not attempt to disassemble the instrument.

department.



AC power input should be within the voltage range specified on the rear

panel. Please ensure that the correct fuse is installed prior to applying power for the

first time.



To avoid electrical shock, the power cord protective grounding conductor

must be grounded.



In order to protect against fire, replace the fuse with the specified type only.

Make sure to disconnect the power cord before replacing the fuse. A blown fuse is

indicative of a problem with the instrument. The problem must be repaired before

replacing the fuse.

 It is important to always keep the front panel connectors clean.

 Disconnect the AC power cord from the instrument before cleaning. Use a soft cloth

dipped in a solution of mild detergent and water. Do not spray any liquid onto the

unit. Do not use any cleaners containing benzene, toluene, xylene, acetone and/or

any other harsh chemicals.

Distributed by: Reliant EMC LLC, +1 408 916‐5750, [email protected], www.reliantemc.com

ATTENTION

Refer Manual

WARNING

High Voltage

Page 3 of 15

Please contact our service

MANUAL_ACS-230-25W Rev. M02.15