Follett Horizon HCE1000AJS Інструкція з монтажу Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Льодогенератор Follett Horizon HCE1000AJS. Follett Horizon HCE1000AJS 17 сторінок. For drop-in satellite-fill applications
Друкувати сторінку
Prepare the dispenser.
2.1
3.1
Dispenser preparation
➌
➍
4"
(101,6mm)
• Determine best route for ice transport tube run. Note: 12" (304,8mm) clearance is required.
• Drill 1 3/4" (44,5mm) hole through either side of dispenser
➋
• Install gasket
• Attach bulkhead fitting with flat up
• Position and secure nut locking plate
• Verify installation of O-ring on stainless steel ice transport tube coupling
• Insert stainless steel ice transport tube coupling
➑
coupling cap
• Soften ice transport tube with hot water (160 F (71 C)) to ease assembly
• Attach ice transport tube to coupling with supplied hose clamp
6
➋
➊
➌
onto bulkhead fitting
➍
and tighten bulkhead nut
➏
Dispenser preparation
➐
➎
➏
➐
➑
➊
with supplied screws
➐
into bulkhead fitting and secure with
DROP-IN • SATELLITE-FILL
self-contained
➒
Hot Water
12"
(304,8mm)
min.
➓
➎
➐
➒
➓
3