Dahua Technology COP Security ITC237-PU1A-IRHL Посібник зі швидкого встановлення - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Цифрова камера Dahua Technology COP Security ITC237-PU1A-IRHL. Dahua Technology COP Security ITC237-PU1A-IRHL 12 сторінок.
Друкувати сторінкуCONFIGURATION
Once the camera has been mounted and all connections terminated, use a PC or Laptop connected to the same network switch
as the ANPR to login to the web browser interface. By default the IP address of the camera is 192.168.1.108, if required this can be
changed via the Config Tool or within the camera web browser.
Login to the camera via the computers web browser. Username:
NOTE: When connecting to an NVR it is vital to use the correct login credentials in the NVR remote device menu. Failure to input the
correct credentials will lock the camera until the correct credentials are used and the camera is rebooted.
Live View
Logged Plate
Number
Plate
Snapshot
Once logged into the camera the live display will be shown.
To configure the camera lens and recognition settings, first select the install button.
The camera has built in electric back focus, this allows for adjustments to the focus to be made via the web browser (manual focus
is still required initially). To use this feature select the AutoFocus button.
Select the Region button and then Redraw, use the left mouse button to draw the detection area that vehicles will pass through.
Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com
admin123
admin
Password:
Install
Full Screen
Snapshot
Event List
5