AMSEC ESL15 Інструкція з експлуатації

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Замки. AMSEC ESL15. AMSEC ESL15 4 сторінки. Electronic lock
Також для AMSEC ESL15: Інструкція з експлуатації Посібник з експлуатації (10 сторінок)

Друкувати сторінку

American Security Product Co.

Operating Instructions for the ESL15 Electronic Safe Lock

Your AMSEC ESL15 Electronic Safe Lock has a Master Combination of

To open the lock, simply press the "C" key to clear and wake up the electronics. Now press the

keys of the combination one at a time and finish with the "#" key. If the combination keyed is

correct, the lock will cycle open for three (3) seconds. During this 3-second period, turn the handle

of the safe to the unlocked position and pull the door open.

Contents

Section

Description

ESL15 Lock Features

A few things to remember about using the ESL15 Safe Lock

Users

Combination Changing

Lock Feature Setting and Function Codes

Mixed Operating Modes

Record Keeping

ESL15 Lock Features

The ESL15 Electronic Safe lock has many advanced features used in commercial applications.

These features offer the Supervisor, referred to as the Master User, the ability to manage access to

the safe in many ways. The features are:

1.1 Time Delay:

Time delay forces the user to wait a pre-determined time period before the

safe can be opened. This feature is a robbery deterrent, whereby the user can cooperate

with a robber in opening the safe, but forces the robber to wait before access is granted.

The idea is that a robber is too impatient to wait that long and gives up. Time delay

periods are typically set for 10 or 15 minutes. The ESL15 can be set for a Delay Period of

01 to 99 minutes. If a user keys in a valid combination, a flashing of the LED Keypad

lamps at approximately 2 times per second indicates the Delay Period. At the end of the

Delay Period, a long warbling tone is sounded to indicate the completion of the delay. An

Open Period begins timing after the completion of the Delay Period and is indicated by 4

beeps and LED flashes every five seconds. During this period, a valid user must key a

combination to cause the lock to open. The open period can be set for 1 to 9 minutes

long. Time Delay can be canceled during the delay period by pressing "C – (any number

key) - #".

1.2 Multiple Users: Many cash handling methods require that several people have access to the

safe. With an electronic lock in multi-user mode, there is no need for all users to share

the same combination, as is the case with a mechanical combination lock. This feature

also allows the supervisor (Master User, User 0) the ability to control the subordinate

users individually and makes employee turnover easier to manage because individual

users can be added and deleted at will without affecting other Users.

As an added benefit, a "Poor Man's Time Lock" effect can be implemented daily where

the Master User can disable the Multi-User Mode (F10=0) at the end of the day and then

re-enable the mode (F10=1) at the beginning of the next business day. This causes the

lock to reject all the Subordinate User Codes during off-business hours. The individual

subordinate user codes are not lost, just disabled.

P/N 4305356 Revision C

C-1-2-3-4-5-6-#

1.3 Dual Control: This feature provides for a higher level of security, where two different

combinations are required to open the safe. When set (F30=1), the lock requires that two

users key their individual codes, one after the other, before the lock will open. After the

first user keys a valid combination, a short warbling tone is sounded, and the second user

is then required to key a valid code. If no second code is keyed within 10 seconds, the

lock goes to the resting condition and the process must be started again.

1.4 Armored Car Time Delay Bypass: This feature (F40) allows Time Delay to be used

under normal access situations, but provides a means to bypass time delay when cash

handling methods require that an Armored Car courier can take deposits without waiting

for the delayed access. It still requires that a valid resident User be present to open the

safe. The Armored Car Code (User 9) can be keyed in first, followed by a valid user code

or, the Armored Car Code can be used during the Delay Period to stop the delay and

then the user can open the lock with a valid code.

Page

1.5 Subordinate User Control: The Master User has the option of allowing or not allowing

certain capabilities of the Subordinate Users as follows.

Two Subordinate Users opening the safe in Dual Combo Mode (F31).

The Subordinate User authorizing Armored Car Time Delay Bypass (F41).

The Subordinate User changing their own combination (F60).

1.6 Reset All Functions:

is considered "default" settings. It disables all the various modes, deletes all the users

and their codes, and cleans up any unknown settings. This is useful to get a fresh start

after one has lost track of programming or for personnel changes at the Master User

level.

A few things to remember.

2.1

With each keystroke the keypad the red keypad LED will flash, and a chirp is heard.

2.2

If 4 (four) incorrect combinations are entered, the lock will go into a "Penalty Lockout" for 15

minutes to prevent trial and error manipulation attempts at opening the lock. The keypad LED

will flash on once every 5 seconds during the penalty period. If you press any key during the

lockout period, the keypad LED will flash with a chirp 8 times rapidly to indicate the lockout

condition. Note that removing power during lockout will re-start the penalty timer.

Before keying the combination, be sure that the handle of the safe is in the fully locked

2.3

position to allow the lock to open freely.

2.4

If the lock fails to open, replace the batteries with good quality fresh alkaline 9-volt batteries.

To replace the batteries, simply turn the keypad housing counter-clockwise to the stop and pull

it away from the base. Un-snap the old batteries and clip on the new ones. Position them in

the battery pockets and remount the keypad, watching that the wires are not pinched. You

should replace your batteries once a year to prevent corrosion damage from leaking batteries.

2.5

During any input sequence, if you make a mistake, you can press "C" to clear the previous

input and start over again.

2.6

The ESL15 uses a fixed length 6 (six) digit combination.

2.7

Use only your fingers to key the combination. Sharp objects will result in damage, which is not

covered by the warranty.

2.8

If at any time during opening or combination changing the unit is left without input for 10

seconds, it returns to a low power sleeping condition. If this occurs during a combination

change, the Old Combination is retained.

3 March, 2016

American Security Product Co.

A function has been provided (F99) to reset all the functions to what