Bosch Ascenta SHE5AM02UC Інструкція з ремонту - Сторінка 16

Переглянути онлайн або завантажити pdf Інструкція з ремонту для Посудомийна машина Bosch Ascenta SHE5AM02UC. Bosch Ascenta SHE5AM02UC 50 сторінок. Quick reference instructions
Також для Bosch Ascenta SHE5AM02UC: Інструкція з монтажу Посібник з монтажу (21 сторінок), Енергетичний посібник (2 сторінок), Початок роботи (2 сторінок), Інструкція з ремонту (27 сторінок)

4.10

Aqua sensor

The aqua sensor is located above the drain pump. It's a one-

piece assembly, not a small circuit board pulled out of a plastic

housing. It senses water cleanliness and allows the dishwasher

control to determine removing cycles to save energy.

If water is clean enough, it will be kept for the wash cycle. If not,

the aqua sensor directs the dishwasher to add an additional pre-

rinse or pre-wash cycle.

Dishwashers still operate adequately if aqua sensors fail.

Customers with lightly soiled or pre-rinsed dishes may notice

wash cycles lasting slightly longer.

702_58300000130262_ara_en_c

1. Aqua sensor

2. Sump

3. Drain pump port

4. Heat pump

4.11

Ascenta dishwashers use a two-hose (internal / external) drain

hose system. A 92" long external drain hose is connected (during

installation) to the internal drain hose, with the 90º elbow pointing

toward the customer drain. The external drain hose connects

directly to the customer drain system without an adapter.

The 90º elbow in the hose should be pointed toward the

dishwasher drain connection.

The internal drain hose is held in place at the sump exit by a

white plastic hose lock (1).

Page 16 of 50