Bosch Ascenta SHE5AM02UC 수리 지침 - 페이지 16
{카테고리_이름} Bosch Ascenta SHE5AM02UC에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Ascenta SHE5AM02UC 50 페이지. Quick reference instructions
Bosch Ascenta SHE5AM02UC에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (21 페이지), 에너지 매뉴얼 (2 페이지), 시작하기 (2 페이지), 수리 지침 (27 페이지)
페이지 인쇄
4.10
Aqua sensor
The aqua sensor is located above the drain pump. It's a one-
piece assembly, not a small circuit board pulled out of a plastic
housing. It senses water cleanliness and allows the dishwasher
control to determine removing cycles to save energy.
If water is clean enough, it will be kept for the wash cycle. If not,
the aqua sensor directs the dishwasher to add an additional pre-
rinse or pre-wash cycle.
Dishwashers still operate adequately if aqua sensors fail.
Customers with lightly soiled or pre-rinsed dishes may notice
wash cycles lasting slightly longer.
702_58300000130262_ara_en_c
1
1. Aqua sensor
2
2. Sump
3. Drain pump port
4. Heat pump
3
4
4.11
Drain hose
Ascenta dishwashers use a two-hose (internal / external) drain
hose system. A 92" long external drain hose is connected (during
installation) to the internal drain hose, with the 90º elbow pointing
toward the customer drain. The external drain hose connects
directly to the customer drain system without an adapter.
The 90º elbow in the hose should be pointed toward the
dishwasher drain connection.
The internal drain hose is held in place at the sump exit by a
white plastic hose lock (1).
1
Page 16 of 50