Draper Storm Force 56457 Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для М'ясорубка Draper Storm Force 56457. Draper Storm Force 56457 20 сторінок. 230v 650w

PREPARING THE ANGLE GRINDER

8.3 FITTING/REPLACING

ACCESSORIES (sold separately) –

FIGS. 3 – 5

Warning! Prior to mounting an abrasive wheel ensure

the expiry date has not expired, rendering it potentially

hazardous.

Warning! Selection of the correct accessory, suitable

for the intended application is vital. Seek guidance if

uncertain of selection.

Warning! The rated (no load) revolutions per minute

of the tool must not exceed the speed capacity of the

accessory. Please refer to the accessory

manufacturers instructions for information.

Visual Inspection:

– Prior to fitting, abrasive/superabrasive wheels

shall be subject to a visual inspection.

Inspection:

– Each time after mounting, the

abrasive/superabrasive wheel shall be test run for

a reasonable time.

– The specified maximum operating speed of the

wheel shall not be exceeded.

– Damaged abrasives shall be destroyed.

– Always wear approved safety goggles.

Important information:

B, C, D (FIG.3):

– For cutting applications, and to comply to

current legislation, it is necessary to replace the

"grinding" guard supplied with this machine with

a "cutting" guard.

A. Type 27:

Depressed Centre Grinding Wheel

B. Type 41:

Flat Cutting-off Wheel

C. Type 42:

Depressed Centre Cutting-off Wheel

D. Superabrasive Wheel

(Diamond/CBN Abrasive)

E. Wire Cup Brush

FIG.3

- 14 -

Grinder Spindle (M14)