Draper Storm Force 56457 Посібник користувача - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник користувача для М'ясорубка Draper Storm Force 56457. Draper Storm Force 56457 20 сторінок. 230v 650w
Друкувати сторінку
9.
BASIC ANGLE GRINDER OPERATIONS
9.1 ON/OFF SWITCH – FIG.6
– Push the switch (1) forward to start the grinder.
– Push the switch further forwards and down to lock
it in the 'ON' position.
– To stop the grinder, release the switch by pushing
down on the back of the switch (1).
Note: To prevent accidental starting in a situation of
power failure to the grinder, the 'ON/OFF' switch (1) is
fitted with a protective device that prevents the angle
grinder from starting up automatically when the power
is re-established. In this case, and with the power
re-established, release the switch to the 'OFF'
position, then switch to 'ON' as normal.
Warning! Do not set the machine down until the
spindle has completely stopped.
Note: During use, keep clothing out of the line of any
sparks formed. Sparks from metal grinding can set fire
to many types of clothing in a short time. The risk is
less if your outer clothing is made of wool, or flame
retardant treated cotton.
Dust
A correctly fitted dust mask, suitable for the activity
and in accordance to the relevant standard, must be
worn.
9.2 GRINDING – FIG.7
When performing grinding operations maintain an
angle of approximately 30° between the work surface
and the disc face.
Only use abrasives specifically designed for this task.
9.3 CUTTING
Important legal information:
– Cutting operations should only be attempted
with the "cutting" guard fitted to this grinder.
– Please contact Draper Tools for further
information on how to purchase this optional
accessory.
– This guard must be fitted for your safety.
– When performing cutting-off operations do not
incline the machine as this can lead to the
abrasive wheel becoming jammed, damaged or
excessively and abnormally worn.
– Only use abrasives specifically designed for
this task.
FIG.6
FIG.7
Warning! As the abrasive wheel wears
during use, its diameter reduces. This
reduces the peripheral speed and the
machine's efficiency. This results in
increased load on the grinding machine
which if continued will damage the motor.
Ensure that the diameter of the wheel is
within 25% of its original size.
Important: Excessive pressure on the
machine does not result in a higher abrasive
efficiency. Excessive pressure increases
wear and tear on the accessory and will
damage the angle grinder which is not
covered under the guarantee.
- 16 -
(1)