Electrolux EPPWEHGFB Посібник - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник для Пральна машина Electrolux EPPWEHGFB. Electrolux EPPWEHGFB 28 сторінок.

To exit the programming mode, press the Wash cycle 3

button ("I" - Table 2 "Control panel").

Notes for external dispensers:



the detergent dispenser only

operates during wash pump operation; terminals

7-9 of the main terminal board are powered at the

same time.



the detergent dispenser only

operates during filling electrovalve operation for

restoring the boiler level; terminals 7-9 of the main

terminal board are powered at the same time.

For connections, see the wiring diagram.

Example:

Supposing that an external detergent dispenser has

been connected with a tank concentration measuring

sensor, a standard setting could be as follows:



the dispenser is not activated during filling of

the tank.



the dispenser is activated during wash

pump operation and, thanks to the concentration

measured by the conduction sensor, the correct

amount of detergent is dispensed.

Changing the detergent type.

If changing to a different detergent type (even one by

the same manufacturer), you must rinse the suction

and pressure hoses with fresh water before connecting

the new detergent container. Otherwise, the mixing of

different types of detergent will cause crystallisation,

which may result in a breakdown of the dosing pump.

Failure to observe this condition will invalidate the gua-

rantee and product liability.