Formax FD 8500SC Посібник оператора

Переглянути онлайн або завантажити pdf Посібник оператора для Знищувач паперу Formax FD 8500SC. Formax FD 8500SC 2 сторінки. Paper shredders cross-cut strip-cut
Також для Formax FD 8500SC: Посібник оператора (2 сторінок)

Друкувати сторінку

Safety Devices and Other Features

Formax 8000 Series Shredders are equipped with various safety features:

Automatic Reverse Rotation

When too much paper is inserted, the cutter stops operating

and automatically rotates in reverse to discharge the jammed

paper. An alarm sounds. Reduce the amount of paper and

restart the operation.

Door Switch

If the door is open, the shredder will not operate.

Automatic Stop

When the shredded paper ﬁ lls the wastebasket, the "FULL"

light comes on and the cutter stops operation. Open the door,

remove the wastebasket and empty paper scraps. Replace

the wastebasket, close the door and continue operation.

Automatic Power Shut-Off

• After 30 minutes of non-use, a "beep" will sound and the power is shut off.

• If the shredder operates continuously for more than 30 minutes, the

power is automatically shut off.

• To operate the machine continuously for longer than 30 minutes, push the

"AUTO" button.

Maintenance

• Disconnect power by pulling power cord plug from wall outlet.

• To clean the exterior, wipe the surface with a soft cloth. If the surface is

very dirty, use a neutral detergent, then wipe again with a soft cloth.

CAUTION:

• Never put water directly on the surface of the shredder.

• Never clean the case with benzene or thinner, since it will cause

discoloration.

• Do not dismantle the shredder. Contact your Formax Dealer for service.

Paper Shredders

FD 8500CC Cross-Cut

FD 8500SC Strip-Cu

1/2006

OPERATOR MANUAL

FIRST EDITION