AND UA-704 Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Монітор артеріального тиску AND UA-704. AND UA-704 16 сторінок.
Також для AND UA-704: Інструкція з експлуатації (16 сторінок)

Друкувати сторінку

6. Press the exhaust valve button to completely release

air from the cuff.

When a measurement is made with insufficient

pressure, the

pressurize the cuff to a pressure. Stop squeezing

the rubber bulb when the

When a measurement is made with an erratic pulse

or in a very noisy environment,

7. Turning the power off

the

Press

START

The device will be in standby mode.

8. Subsequent measurements

If a subsequent measurement is required, turn off the power and turn it on

again. When "0 " is

Note: Allow at least three minutes between measurements on the same person.

9. Automatic power-off function

If the device is left on after a measurement, it will turn off automatically

after about one minute. It may be turned off at any time by pressing

button

START

Notes For Proper Measurement

Sit down in a comfortable position. Place the arm to be used for the

measurement on a table or other support so that the center of the cuff will

be at the same height as your heart.

Relax for about five or ten minutes before taking a measurement. If you

are excited or depressed by emotional stress, the measurement will

reflect this stress as a higher (or lower) than normal blood pressure

reading and the pulse reading will usually be faster than normal.

Your blood pressure varies constantly, depending on what you are doing

and what you have eaten. What you drink can have a very strong and

rapid effect on your blood pressure.

Measurement

mark will be displayed. Re-

mark disappears.

button

to turn the power off.

displayed

, the device is ready for another measurement.

ENGLISH 8

will display.

From previous page

Press exhaust valve

Bulb

Releasing air

from the cuff

button

START

the