Aleo ELEGANTE Посібник з монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з монтажу для Сонячна панель Aleo ELEGANTE. Aleo ELEGANTE 14 сторінок. Bipv modules
Також для Aleo ELEGANTE: Посібник з монтажу (16 сторінок)

Друкувати сторінку

7.3

Punctually supported modules

The technical rules for the dimensioning and

execution of point-mounted fastening types, as

for instance module clamps, are the DIN18008

Part 3: Point fixed glazing.

The point holders must be made of stainless

steel with at least a corrosion resistance class II.

The assembly must be designed in such a way

that the modules can be installed with conside-

ration of structural tolerances and that the glass

cannot come in contact with other hard compo-

nents (e.g. metal) under operating conditions

(load, temperature, inflection of load bearing

construction).

The free edge of the glass must not be more

than 300 mm and at least 80mm.

The required minimum mounting depth of a

clamp is 15mm.

Elegante Modules punctually supported with

clamps on the long sides, mounted according to

the rules, can bear pressure and soak loads till

5400Pa.

aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]

Figure 7C

NOTE

Installation Manual GG Elegante Rel. 1.2, 06/2019, EN

f ≤ l /200

max. 15mm

≥ 80mm & ≤ 300mm