Anden DH55A77 Посібник з монтажу та експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Контролер Anden DH55A77. Anden DH55A77 9 сторінок. Dehumidifier control

5. Snap the wiring access cover back into place, power up the dehumidifier and use the ON/OFF

button to turn the unit OFF (if ON).

90-1854

6. Press and hold the MODE button for 3 seconds to enter the Installer Set Up menu. REMOTE

DISABLED will appear on the display when Installer Set Up is entered.

7. Press the

button to change to REMOTE ENABLED.

90-1854

8. Repeatedly press the MODE button until DONE appears on the display.

SYSTEM CHECKOUT

1. Check all wiring.

2. Plug in dehumidifier and restore power to the HVAC system.

3. Turn on/off switch on dehumidifier ON. After a 4 second start up sequence all buttons on the

Model A77 will be functional.

• The control will be OFF.

• The humidity setting will be 60%.

• The control will display the measured humidity.

FIGURE 6 – EXTERNAL CONTROL

MODEL A77 CONTROL

Measured

Humidity or

Setting

MODEL A77 LCD DISPLAY

Solid ON:

Control On

Blinking ON:

Dehumidifying

OFF: Control Off

Humidity Setting

and Offset

Adjustment

Control must be

ON to adjust offset

and setting.

Control On/Off

SET: Shows when

humidity setting

displayed or being

changed.

Blinking ON +

: Control Limit Exceeded.

See Control Limits, page 11.

90-2483

90-1636