Bosch Professional GWS 800 Оригінальна інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Електроінструмент Bosch Professional GWS 800. Bosch Professional GWS 800 23 сторінки.

Друкувати сторінку

10 | English

Protective guard for grinding

Place the protective guard

(5) on the spindle collar. Ad-

just the position of the pro-

tective guard (5) to meet the

requirements of the opera-

tion. Lock the protective

guard (5) by tightening the

locking screw (7) using the

combination wrench (3).

Adjust the protective guard (5) such that sparking in

the direction of the operator is prevented.

Note: The coding cams on the protective guard (5) ensure

that only a protective guard that is suitable for the power

tool can be fitted.

Extraction guard for cutting with a guide block

The extraction guard for cutting with a guide block (20) is fit-

ted in the same way as the protective guard for grinding (5).

Protective guard for cutting

Always use the protective guard for cutting (6) when

cutting with bonded abrasives.

Provide sufficient dust extraction when cutting stone.

The protective guard for cutting (6) is fitted in the same way

as the protective guard for grinding (5).

Side handle

Do not operate your power tool without the side

handle (4).

Do not continue to use the power tool if the auxiliary

handle is damaged. Do not make any alterations to the

auxiliary handle.

Screw the side handle (4) on the left or right of the machine

head depending on how your are working.

Low-vibration auxiliary handle

The low-vibration auxiliary handle reduces vibration, en-

abling the tool to be used safely and more comfortably.

Do not operate your power tool without the side

handle (4).

Do not make any alterations of any kind to the auxili-

ary handle.

Do not continue to use a damaged auxiliary handle.

Hand guard

Always fit the hand guard (14) when working with the

rubber sanding plate (15) or with the cup brush/disc

brush/flap disc.

1 609 92A 7C2 | (11.08.2022)

Screw the auxiliary handle

(4) on the right or left of the

machine head depending

on the working method.

Attach the hand guard (14) to the side handle (4).

Fitting the Abrasive Tools

Pull the plug out of the socket before carrying out any

work on the power tool.

Do not touch grinding and cutting discs until they have

cooled down. The discs can become very hot while work-

ing.

Clean the grinding spindle (13) and all the parts to be fitted.

Lock the grinding spindle with the spindle lock button (1)

before clamping and releasing the abrasive tools.

Do not press the spindle lock button while the grind-

ing spindle is moving. The power tool may become dam-

aged if you do this.

Grinding/cutting disc

Pay attention to the dimensions of the abrasive tools. The

diameter of the hole must match that of the mounting flange.

Do not use an adapter or reducer.

When using diamond cutting discs, ensure that the arrow in-

dicating the direction of rotation on the diamond cutting disc

matches the direction of rotation of the power tool (see the

direction of rotation arrow on the machine head).

See the graphics page for assembling instructions.

To fasten the grinding/cutting disc, screw on the clamping

nut (12) and tighten with the combination wrench (3).

After fitting the abrasive tool, check that the abrasive

tool is fitted correctly and can turn freely before

switching on the power tool. Make sure that the abras-

ive tool does not brush against the protective guard or

other parts.

Mounting flange for grinding spindle M10:

The mounting flange can be used on both sides.

Flap disc

Always fit the hand guard (14) when working with the

flap disc.

Rubber sanding pad

Always fit the hand guard (14) when working with the

rubber sanding pad (15).

See the graphics page for fitting instructions.

Screw on the round nut (17) and tighten with the combina-

tion wrench (3).

Cup brush/disc brush

Always fit the hand guard (14) when working with the

cup brush or disc brush.

See the graphics page for fitting instructions.

The cup brush/disc brush must be screwed onto the grinding

spindle until it rests firmly against the grinding spindle flange

at the end of the grinding spindle thread. Tighten the cup

brush/disc brush with an open-ended spanner.

Approved abrasive tools

You can use all the abrasive tools mentioned in these operat-

ing instructions.

Bosch Power Tools