CARNES HXHAF Посібник користувача та довідковий посібник - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача та довідковий посібник для Зволожити CARNES HXHAF. CARNES HXHAF 20 сторінок.

Outdoor Temperature Sensor Option 2 —

Outdoor Air Intake

Mount the sensor in the outdoor air intake by drilling a 1/4 inch hole within

12" of outside. Angle the hole towards the outside. Insert the temperature

sensor into the intake pipe until the sensor is at least 2" outside the

wall of the house. Seal the hole and secure the wire so it cannot be

accidentally pulled out. See Figure 4 for example installation.

CAUTION: electrical interference can cause erratic system operation.

•

Do not route temperature sensor wiring with building power wiring, next

to control contactors, near light dimming circuits, or electric motors.

•

Use shielded cable to reduce interference when rerouting is not

possible.

•

Be sure wires have a cable separate from the humidistat cable.

•

See Figure 5 for wiring diagram.

Drill Hole in

Pipe & Seal

Connect to

Humidistat

(ODT)

Figure 4: Outdoor Temperature Sensor in Furnace Intake Pipe

Form 16763

RESIDENTIAL HUMIDISTAT

INSIDE

OUTSIDE

Furnace

Fresh Air

Intake

OAT (Outdoor

Air Temperature)

Sensor

2" min.

Installation