Anderson FFA10 Посібник з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Пальник. Anderson FFA10. Anderson FFA10 13 сторінок.

seal plate. If necessary, adjust the height of the bracket to keep the bracket

concentric with the burner block.

Fix the position of the bracket and remove the positioning tube. Secure the base

plate to steel structure.

6.3

Install burner

Place the burner on the bracket, make the nozzle end against the sealing plate, and

fix the burner with the bracket locking ring. Make sure that the burner does not slip

due to external forces.

Connect the burner cooling air hose to the cooling air inlet.

Connect the burner gas hose to the gas inlet as shown in Figure 4.

Open the cooling air ball valve at the front end of the burner and check the pressure

at 100-500mbar. Adjust the cooling air needle valve (or globe valve) to make the

pressure meet the requirements.

Anderson Thermal Soluions（Suzhou）Co., Ltd

Anderson Thermal Solutions –FFA10 Burner Operation Manual