Compac FP50 G3 Інструкція з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Compac FP50 G3. Compac FP50 G3 13 сторінок. Presses datelier

3. Connect the Air supply: 6 to12 bar (88 to 176 psi). (See Fig.2)

4. This press has air operated fast approach and air return, and is therefore fitted with a water separator

and a pressure regulator located under the oil tank.

Adjust the pressure regulator for Max 0.7 MPa (7 bar) (102 psi).

Adjustment of the air pressure regulator.

The pressure regulator can be adjusted by pulling up the safety grip (see Fig. 3)

To increase the pressure the safety grip is turned clockwise (+).

To lower the pressure the safety grip is turned counterclockwise (-).

Adjust the pressure regulator to Maximum 0.7 Mpa (7 Bar) (102 psi)

When the correct working pressure is reached, click the safety grip down to lock the regulator.

5. The press is from the factory filled with the correct olie volume (See section Oil change)

The immediate visual low oil level in the oil container is normal.

HP-FP-40 G2-50 G3-60 G2-70 G2 (GB) V 1.1

Fig. 2

Fig. 3

Safety grip

2/3

13-08-2015 SN/PD