Electrolux EFC 90344 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Вентиляційна витяжка Electrolux EFC 90344. Electrolux EFC 90344 14 сторінок.
Також для Electrolux EFC 90344: Посібник користувача (44 сторінок)
4
CAUTION
Closely follow the instructions set out in this
manual. All responsibility, for any eventual
inconveniences, damages or fi res caused
by not complying with the instructions in
this manual, is declined. The extractor hood
has been designed exclusively for domestic
use.
WARNING! Do not connect the appliance
to the mains until the installation is fully
complete.
Before any cleaning or maintenance
operation, disconnect hood from the mains
by removing the plug or disconnecting the
mains electrical supply.
Always wear work gloves for all installation
and maintenance operations.
The appliance is not intended for use by
children or persons with impaired physical,
sensorial or mental faculties, or if lacking
in experience or knowledge, unless they
are under supervision or have been trained
in the use of the appliance by a person
responsible for their safety.
This appliance is designed to be operated
by adults, children should be monitored
to ensure that they do not play with the
appliance. This appliance is designed to be
operated by adults. Children should not be
allowed to tamper with the controls or play
with the appliance.
Never use the hood without effectively
mounted grating!
The hood must NEVER be used as
a support surface unless specifi cally
indicated.
The premises where the appliance is
nstalled must be suffi ciently ventilated,
when the kitchen hood is used together
with other gas combustion devices or
other fuels. The ducting system for this
appliance must not be connected to
any existing ventilation system which is
being used for any other purpose such as
discharging exhaust fumes from appliances
burning gas or other fuels. The fl aming of
foods beneath the hood itself is severely
prohibited.
The use of exposed fl ames is detrimental
to the fi lters and may cause a fi re risk,
and must therefore be avoided in all
circumstances.
Any frying must be done with care in order
to make sure that the oil does not overheat
and ignite.
Accessible parts of the hood may became
hot when used with cooking appliance.
With regards to the technical and safety
measures to be adopted for fume
discharging it is important to closely follow
the regulations provided by the local
authorities.
The hood must be regularly cleaned on
both the inside and outside (AT LEAST
ONCE A MONTH).
This must be completed in accordance
with the maintenance instructions provided
in this manual). Failure to follow the
instructions provided in this user guide
regarding the cleaning of the hood and
fi lters will lead to the risk of fi res.
Do not use or leave the hood without the
lamp correctly mounted due to the possible
risk of electric shocks.
We will not accept any responsibility for
any faults, damage or fi res caused to the
appliance as a result of the non-observance
of the instructions included in this manual.
USE
The hood has been made for use in the
internal recirculating fi ltering version.
Cooking fumes and steam are aspirated
inside the hood, fi ltered and cleaned,
passing through the fat fi lter/s and the
carbon fi lter/s that MUST be supplied with
the hood.
INSTALLATION
The mains power supply must correspond
to the rating indicated on the plate situated
inside the hood. If provided with a plug
connect the hood to a socket in compliance
with current regulations and positioned in
an accessible area, after installation. If it not
fi tted with a plug (direct mains connection)
or if the plug is not located in an accessible
area, after installation, apply a double
pole switch in accordance with standards
which assures the complete disconnection
of the mains under conditions relating to
over-current category III, in accordance with
installation instructions.
Warning! Before re-connecting the hood
circuit to the mains supply and checking
the effi cient function, always check that the
mains cable is correctly assembled.