Atlas Copco PHE 6 H Інструкція з ремонту - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з ремонту для Дриль. Atlas Copco PHE 6 H. Atlas Copco PHE 6 H 18 сторінок.
Assembly
1
PHE 6 S:
Press the bearing (1) onto the bevel
Mounting the
gear (4). Fit the spring washer (2) and
cylinder
secure it with the spring ring (3).
2
Insert the bevel gear (4) completely with
the bearing (1) flush into the housing.
3
Insert the cylinder (5) into the housing as
far as it will go.
1
PHE 6 H:
Press the bevel gear bearing (2) into the
Mounting the
bevel gear (1).
bevel gear
2
Press the bevel gear (1) flush with the
bearing (2) into the gear housing (3) using
a suitable mandrel for support.
1
Mounting the
Press the needle bearing (6) into the con-
piston and the
necting rod (5).
connecting rod
2
Push the striker (1) with the O-ring (2) into
the piston (3).
3
Put together the piston (3) and the con-
necting rod (5) and push the cylindric
bolt (4) through both borings.
4
Insert the piston (3) with the connecting
rod (5) into the gear housing (7).
Repair Instructions No.181.03/98
1
1
1
2
PHE 6 H / PHE 6 S
2
3
5
4
3
2
5
6
4
3
PAGE
10
1
2
3
7