Atlas Copco PHE 6 H Інструкція з ремонту - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з ремонту для Дриль. Atlas Copco PHE 6 H. Atlas Copco PHE 6 H 18 сторінок.

1
Mounting the
Insert the O-ring (6) into the gear hous-
crankshaft
ing (C).
2
Press the ball bearing (4) onto the crank-
shaft (5).
3
Insert the crankshaft (5) into the gear
housing from below (C) and fit it to the
connecting rod bearing.
4
Mount the spring ring (3).
5
Insert the key (D) into the crankshaft (5).
6
Fit the crank wheel (2) with the collar fac-
ing the eccentric and press it on.
7
Secure the crank wheel (2) with the spring
ring (1).
8
If necessary, mount the welch plug (7).
9
Fill the gear housing (C) through the serv-
ice opening with grease according to the
lubrication chart.
10
Fit the service cover (8) with gasket (B)
and valve (9) and fasten it with the
screws (A).
Steady the crankshaft with a suitable
mandrel which is pushed through the
opening in the cover (otherwise the
crankshaft is pushed in too far).
Repair Instructions No.181.03/98
7
PHE 6 H / PHE 6 S
9
A
8
B
C
7
6
5
D
4
3
2
1
PAGE
11
4