Atlas Copco G2412-1 Інструкція до продукту - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція до продукту для М'ясорубка Atlas Copco G2412-1. Atlas Copco G2412-1 20 сторінок. Die grinder

Друкувати сторінку

G2412-1

Legend to page 2

Operating instructions

Operation instructions

WARNING Risk of severe injury

Air under pressure can cause injury.

Always shut off the air supply when not in use or before any adjustments.

►

Drain the hose of air pressure and disconnect the tool from air supply when not in use or before

►

any adjustments.

Always use the correct hose size and air pressure for the tool.

►

WARNING Risk of Serious Injury or Death

Wrong insert tool can burst and cause serious injury or death.

Use an insert tool with a max operating speed higher than or equal to the tool speed.

►

Do not use any other insert tool than specified by the manufacturer (no cutting off wheels or router

►

bits).

■

Do not mix mm shanks with inch collets and vice versa.

■

Observe a minimum of 10 mm (0.4") axial grip of the shank.

■

When attaching mounted wheels or burrs, reduce the overhang by pushing the shank all the way into

the collet. Also do a check of the recommendations given by the tool manufacturer.

■

Observe that increased overhang of shank reduces permissible speed.

■

Before starting the machine, make sure that the collet is tightened correctly.

■

Do a test run of every newly attached wheel in a safe position for 30 seconds. Use a barrier (such as

under a heavy work table) to stop any possible broken wheel parts. Stop immediately if the vibration

is too much.

Legend to page 2

Operation instructions

Attach collet and shank

Press safety catch forward and press trigger to start

Air hose size: 13 mm (1/2 ")

Maximum air pressure: - 7 bar (- 102 psig)

Mounted wheel and carbide burr

WARNING Compressed air can cause serious injury

Always shut off the air supply, drain hose of air pressure and disconnect the tool from air supply;

►

when not in use, before making any adjustments to the product - for example changing acces-

sories, or when making repairs.

Do a free speed check

Maximum

20000 r/m

Maximum air pressure

7 bar 102 psig

Operation