Bose 321 GSX Series III Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Система домашнього кінотеатру Bose 321 GSX Series III. Bose 321 GSX Series III 48 сторінок. Intelligent playback system
Також для Bose 321 GSX Series III: Посібник користувача (44 сторінок), Посібник з швидкого налаштування (2 сторінок), Посібник (29 сторінок)
Друкувати сторінку
Preparing for Use
Installing remote control batteries
Figure 1
Installing the batteries
Programming the advanced remote
4
1. On the back of the remote, slide open the
battery compartment (Figure 1).
2. Insert the two supplied AA (IEC-R6) 1.5V
batteries, or their equivalent, as shown.
Match the plus (+) and minus (–) marked on
the batteries with the plus (+) and minus (–)
inside the battery compartment.
3. Slide the battery compartment cover back
into place.
Note: Replace the batteries when the remote
control stops operating or its range seems
reduced.
Find the four-digit setup code for your cable box,
satellite box, or TV in the Appendix at the end of
this guide.
There may be more than one code listed for
your model of a particular product brand.
If you notice a lack of response or limited
functionality after programming the remote,
you may need to use a different code for
that product.
Note: When the remote is programmed
for use with both the cable/satellite box and
the TV, the channel controls on the remote
will change channels on the cable/satellite
box and not on the TV .
AM272394_00_pdf • October, 2003
–
–
+
+