Absolare Integrated Amplifier Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Absolare Integrated Amplifier. Absolare Integrated Amplifier 11 сторінок.

7. Troubleshooting and Maintenance

Surface of the unit is dirty

No power light

Remote control is not working

Power light is on, tube heaters are

glowing, but no sound

Noise / hum in the sound

If the problem is persistent, contact your nearest ABSOLARE dealer.

- Input Sensitivity: 0.5 Volts (Balanced Version 2 Volts)

- Tubes: 2 x (12AU7 / ECC82) – every unit supplied with select NOS tubes

- Inputs: 4 RCA with Single-Ended / 4 XLR with Balanced model

- Input impedance: 100 kΩ

- Output Power: 200 Watts min. @ 4 Ω, 150 Watts min. @ 8 Ω

- 48-step attenuator- IR Remote Control

- Gain: 37 dB

- Bandwidth: 20Hz -20kHz within +/- 0.2dB, 15 Hz – 30 KHz +/- 1.0 dB

- Dimensions: 38.2 x 67.4 x 20 cm / 15" x 26.4" x 7.9" (W x D x H), excl. feet

- Weight: 30 kg

ABSOLARE Integrated Amplifier User Manual 1.2

Clean with a slightly damp cloth.

- Check AC line voltage

- Check the main fuse

- Check the angle, see section (6.2)

- Check the battery of the remote-control

unit

- Check the input cables, speaker cables

and source

- Check input selector

- Check if tube(s) are defective

- Check grounding of power, input cables

and source