247Security Zeus-W Короткий посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Короткий посібник для ВІДЕОРЕЄСТРАТОР 247Security Zeus-W. 247Security Zeus-W 13 сторінок.

The installation of your digital video recorder and components is comprised of the

following five steps:

1. DVR and Camera Placement

2. Cables

3. Connections and On-site Preparations

4. Equipment Test

5. DVRViewer Application and Camera Aiming

1. DVR AND CAMERA PLACEMENT

DVR

The first step is to determine the most appropriate location for the DVR and cameras. Mounting locations will vary

depending on the bus style, body manufacturer and bus year. Mounting orientation can be horizontal, vertical, or at

angles for spatial consideration. Mount the DVR through the affixed mounting base and ensure there is sufficient

space in front and around the DVR for ventilation, free movement on the mounting plate and for easy removal of the

hard drive—approximately 7 inches so the door can open freely. Recommended installation locations include: inside

the front bulkhead, behind the driver's mirror or other locations where moisture and possible tampering will be at a

minimum.

CAMERAS

Cameras are available in many different lens sizes and most are mounted on an X-Y-Z axis so you adjust the image

to look horizontal even if the camera is mounted on the curve of the ceiling, as is convenient to avoid being a

headroom hazard to occupants. A minimum 1.5 inch hole is recommended for camera mounting and safe cable

pass through. Avoid installing cameras to sections of the ceiling that are exposed to, or are leaking, water.

2. CABLES

All cables for the installation and maintenance of your DVR system are included and consist of the following:

Camera Cable

(One per Camera)

247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com

Cables for Installation

Event Marker

Power Cable

USERS MANUAL

ZEUS mDVR

Digital I/O Cable

GPS Receiver

Module (Optional)