DSC Maxsys PC6010 Посібник користувача - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник користувача для Система безпеки DSC Maxsys PC6010. DSC Maxsys PC6010 20 сторінок.

Друкувати сторінку

3.3 Viewing and Clearing Fault Conditions __________________________________________

The control panel continuously checks for a number of possible faults.

If one of these faults occur, the keypad beeps twice every 10 seconds. Enter your access

code, and follow the procedure below, to see a list of system faults.

NOTE: A fault condition reduces the security your system is designed to provide. Call a

Supervisor, or Master user to arrange service.

12:00 2000/01/01

Step

Enter Your Code

If there is a fault, the keypad displays:

System Fault

View Fault List?

Step

2. The keypad displays the list of faults. For example:

Telephone Line

Fault

Step

3. When you come to the end of the list, the keypad displays:

End of List

Clear Faults?

Step

4. The system tries to reset the faults. If all the faults are reset, the keypad displays:

Fault(s) Now

Cleared!

Step

5. If the system cannot reset all the faults, the keypad displays:

Unable to Clear

All Fault(s)!

To view the faults again, press

To exit fault viewing, press

Enter your access code.

To exit fault viewing, press

To view faults, press

If you see a flashing >, use the

through the list of faults.

To return to the main menu, press

To clear the faults, press

Call for Service

then,

Exit Now?

keys to scroll

NOTE:

Advanced users

may see a

different list of

faults than Basic

users.