DSC Maxsys PC6010 Посібник користувача - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник користувача для Система безпеки DSC Maxsys PC6010. DSC Maxsys PC6010 20 сторінок.
Друкувати сторінку
Automatic arming (auto-arming) is when the system automatically turns on one or more
areas of the system at preset times. All users can postpone auto-arming for a pre-set
period of time. Follow the procedure below.
Delaying Automatic Arming
Before the system begins auto-arming of an area, the keypads will warn users in the area
by beeping continuously (this is the auto-arm warning). If you hear the auto-arm warning,
you can delay the automatic arming. Enter your code at an area keypad. The keypad
displays:
Automatic Arming
in Progress!
To delay the automatic arming, follow the procedure below, starting at step 3.
If you know the system will be auto-arming at a particular time, you can delay the arming
before it starts. Follow the procedure below.
NOTE: If none of your areas are set up for automatic arming, or if automatic arming is
already delayed, or if the system is set up so that users cannot delay automatic arming,
the keypad will display "This Function is Not Available".
12:00 2000/01/01
Step
1.
Enter Your Code
Step
2. The keypad displays:
Do You Want To
Turn Areas On?
Step
Do You Want to
3.
Delay Auto-Arm?
Step
4. The keypad displays the first area which will be auto-armed:
Area 1
Delay Auto-Arm?
5. The keypad displays:
Step
Automatic Arming
Has Been Delayed
The system will try again to arm the system at the end of the delay time programmed
by your installer. If there are more areas that will be auto-armed, the keypad displays
the next area.
Step
6. At the end of the list of areas, the keypad displays:
End of List
Exit Now?
Automatic Arming
S
E
C
T
Enter your access code.
Press
To confirm, press
To confirm, press
To return to the list of areas, press
To return to the start screen, press
15
I
O
N
4
until the keypad displays:
.
.
.
.