DSC PC4936 Інструкція - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція для Система безпеки DSC PC4936. DSC PC4936 4 сторінки.
Також для DSC PC4936: Інструкція з експлуатації (4 сторінок)
Друкувати сторінку
Answering the Doorbell
Your system may have one or
more doorbell stations (as shown
at left).
The doorbell station has only one
button, a call button. Doorbell
stations cannot receive pages,
monitor or receive telephone
calls.
To use the doorbell station:
Press the button on the station. All the interior
audio stations will chime. If you have 2 door-
bell stations in different locations, they can
activate different chimes. This will help you
identify where the call is coming from.
To answer a doorbell call:
Press
on any interior audio station. A
private communication link is established
between the doorbell station and the audio sta-
tion that answered.
Answering the Doorbell "Handsfree"
If your system has been set up to allow hands-
free responses to doorbells, all audio stations
will have 30 seconds to communicate with the
doorbell station which initiated the page.
To respond to a doorbell handsfree:
When you hear the doorbell, talk into the clos-
est audio station. You do not need to press the
Page/Answer button.
To talk longer than 30 seconds:
Before the 30 seconds are up, briefly press
on the closest audio station to estab-
lish a private communication link.
CAUTION: Do not hold the Page/Answer but-
ton for more than 1 second, to avoid acciden-
tally opening the door (see Opening the Door).
NOTE: The handsfree feature will not work if
there is already a page in progress, a telephone
call is in progress or if the monitor feature is
active.
Doorbell While on Page
If a page is in progress when a doorbell is
pressed, only the two persons on the page will
hear the doorbell tone.
To answer the doorbell while on page:
Either person can press
audio station.
The page is disconnected and the person who
pressed the Page/Answer button is immediately
connected to the doorbell station.
Opening the Door (Using Doorstrike)
If your system has been set up for doorstrike
operation, when you answer a call from a door-
bell station, you can open the door near the
doorbell.
To open the door:
Press and hold
station for 2 seconds.
The system sounds an acknowledgement beep
and the door opens.
Monitoring
You can use the Monitor feature to broadcast
one interior audio station to all the other inte-
rior audio stations on the premises. For exam-
ple, this may be useful for monitoring a baby in
a room.
Interior audio stations can still be used to ini-
tiate/answer pages, annunciate and answer the
doorbell and answer telephone calls. If a con-
versation is in progress, the Monitor feature
will not operate until the conversation is ended.
To turn on the Monitor feature:
1.
Go to the audio station in the room you
want to monitor.
2.
Press and hold
seconds. The Do Not Disturb light
flashes and the station is put in Monitor
mode. All sound in the room will be
transmitted to all the other interior
audio stations.
on their
on the interior audio
for at least 2