DSC PC4936 Інструкція - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція для Система безпеки DSC PC4936. DSC PC4936 4 сторінки.
Також для DSC PC4936: Інструкція з експлуатації (4 сторінок)

Друкувати сторінку

Limited Warranty

Digital Security Controls Ltd. warrants that for a period of twelve months

from the date of purchase, the product shall be free of defects in materials

and workmanship under normal use and that in fulfilment of any breach of

such warranty, Digital Security Controls Ltd. shall, at its option, repair or

replace the defective equipment upon return of the equipment to its factory.

This warranty applies only to defects in parts and workmanship and not to

damage incurred in shipping or handling, or damage due to causes beyond

the control of Digital Security Controls Ltd. such as lightning, excessive

voltage, mechanical shock, water damage, or damage arising out of abuse,

alteration or improper application of the equipment.

The foregoing warranty shall apply only to the original purchaser, and is and

shall be in lieu of any and all other warranties, whether expressed or implied

and of all other obligations or liabilities on the part of Digital Security Con-

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security

Controls Ltd. could void your authority to use this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular instal-

lation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Re-orient the receiving antenna.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: "How to Identify

and Resolve Radio/Television Interference Problems". This booklet is available from the

U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4.

IMPORTANT INFORMATION

This equipment complies with Part 68 of the FCC Rules. On the side of this equipment is a

label that contains, among other information, the FCC registration number of this equip-

ment.

NOTIFICATION TO TELEPHONE COMPANY The customer shall notify the telephone

company of the particular line to which the connection will be made, and provide the FCC

registration number and the ringer equivalence of the protective circuit.

FCC Registration Number: F53CAN-31477-KX-N

Ringer Equivalence Number: 0.1B USOC Jack: RJ-31X

Facility Interface Code: 02LS2 Service Order Code: 9.0F

TELEPHONE CONNECTION REQUIREMENTS Except for the telephone company

provided ringers, all connections to the telephone network shall be made through standard

plugs and telephone company provided jacks, or equivalent, in such a manner as to allow

for easy, immediate disconnection of the terminal equipment. Standard jacks shall be so

arranged that, if the plug connected thereto is withdrawn, no interference to the operation

of the equipment at the customer's premises which remains connected to the telephone net-

work shall occur by reason of such withdrawal.

trols Ltd. This warranty contains the entire warranty. Digital Security Con-

trols Ltd. neither assumes responsibility for, nor authorizes any other person

purporting to act on its behalf to modify or to change this warranty, nor to

assume for it any other warranty or liability concerning this product.

In no event shall Digital Security Controls Ltd. be liable for any direct or

indirect or consequential damages, loss of anticipated profits, loss of time or

any other losses incurred by the buyer in connection with the purchase,

installation or operation or failure of this product.

Warning: Digital Security Controls Ltd. recommends that the entire system

be completely tested on a regular basis. However, despite frequent testing,

and due to, but not limited to, criminal tampering or electrical disruption,

it is possible for this product to fail to perform as expected.

INCIDENCE OF HARM Should terminal equipment or protective circuitry cause harm to

the telephone network, the telephone company shall, where practicable, notify the cus-

tomer that temporary disconnection of service may be required; however, where prior

notice is not practicable, the telephone company may temporarily discontinue service if

such action is deemed reasonable in the circumstances. In the case of such temporary dis-

continuance, the telephone company shall promptly notify the customer and will be given

the opportunity to correct the situation.

ADDITIONAL TELEPHONE COMPANY INFORMATION The security control panel

must be properly connected to the telephone line with a USOC RJ-31X telephone jack.

The FCC prohibits customer-provided terminal equipment be connected to party lines or

to be used in conjunction with coin telephone service. Interconnect rules may vary from

state to state.

CHANGES IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES The tele-

phone company may make changes in its communications facilities, equipment, opera-

tions or procedures, where such actions are reasonably required and proper in its business.

Should any such changes render the customer's terminal equipment incompatible with the

telephone company facilities the customer shall be given adequate notice to the effect

modifications to maintain uninterrupted service.

RINGER EQUIVALENCE NUMBER (REN) The REN is useful to determine the quantity

of devices that you may connect to your telephone line and still have all of those devices

ring when your telephone number is called. In most, but not all areas, the sum of the RENs

of all devices connected to one line should not exceed five (5.0). To be certain of the num-

ber of devices that you may connect to your line, you may want to contact your local tele-

phone company.

EQUIPMENT MAINTENANCE FACILITY If you experience trouble with this telephone

equipment, please contact the facility indicated below for information on obtaining service

or repairs. The telephone company may ask that you disconnect this equipment from the

network until the problem has been corrected or until you are sure that the equipment is

not malfunctioning.

Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094

www.dsc.com

Printed in Canada 29003578 R003