Ansen 0964 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Метеостанція Ansen 0964. Ansen 0964 5 сторінок.

CLOCK & CALENDAR SETTING

Hold " CLK/CAL " button for 3 seconds to enter clock set. Using " + , - " to adjust and

" CLK/CAL " to confirm, the following values can be set in sequence: 12/ 24 hr > Year >

Month > Date > Hour > Minutes > ZONE Time

(Enter + - 12 hr in hour offset for different time zones, leave offset to 0 for home time) Press

SET/ ZONE to select home time and ZONE Time

PRESSURE, TEMPERATURE, HUMIDITY TREND INDICATORS

The 3 small arrow icons will indicate: Rising, Steady, Falling. Refresh rate is every hour.

MOON PHASE

The current moon phase is displayed automatically.

ALARM 1, ALARM 2 SETTING

Select AL 1 or AL 2 by pressing the AL key. Hold " AL " for 3 seconds. Press " +, - " to

enter the desired value and press "AL " to confirm setting.

To view alarm time 1 and 2, simply press "AL" button to read AL 1 and AL 2. The alarm time

will display for 5 seconds and resume to normal clock thereafter.

To turn AL 1, AL 2 on and off, press " + (bell) " button

The unit will provide Crescendo Alarm which last for 2 minutes.

LOW BATTERY INDICATION

Low battery indication is available for the home unit itself and all of the remote channels.

Replace the batteries and follow the setup procedure as mentioned in this instruction manual.

SPECIFICATIONS

Range of temperature measurement:

Indoor unit

-5 C to 50 C (32F to 122F)

25% to 90% RH

Remote sensor :

-20 C to 60 C (14F to 140F)

25% to 90% RH

Transmission

30M (100 ft.) open area, RF434 MHz

Resolution

0.1 degree C, 1%RH

Clock

Quartz precision +-30 sec per month when out of RCC

Battery life

12 months (alkaline batteries recommended)