ansio Aeropura Midi Інструкції та посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкції та посібник з експлуатації для Осушувач повітря ansio Aeropura Midi. ansio Aeropura Midi 13 сторінок. 12l dehumidifier
Друкувати сторінкуPRIOR TO OPERATION
Place the dehumidifier in an upright position on a stable, flat surface.
•
Ensure the dehumidifier is at a safe distance at least 50cm away from a wall or object or furniture at the back and atleast
•
20 cm away from objects in other directions.
Supply power should be in correspondence with the value on the nameplate. The power outlet needs to be grounded. Ensure
•
the tank is correctly fitted. If the tank is full or not in place, the tank full indicator light comes on and the dehumidifier will
stop working.
Turn on the power and run the machine as per the operating instructions.
•
OPERATION INSTRUCTIONS
Important note: The humidity reading display at the centre of the control panel displays the room humidity level.
a. CO indicates the machine is running in continuous dehumidifying mode irrespective of the room's humidity level.
b. The preferred humidity level can be set by using the up and down arrow buttons as described in the "Humidity Setting"
section.
NOTE: If the set humidity is higher than the room's humidity, the unit will automatically be forced to shutdown. This can
take a few minutes until the unit senses the room humidity level. The fan would run for a bit longer, after which the unit
turns off. If left unattended, the unit will automatically restart in about 17 minutes to sense the room humidity. If the room
humidity is still less than the set humidity, the unit will shutdown and the cycle repeats. However if the room humidity is
greater than the set humidity , the unit will start functioning.
c. If you would like to know whether the unit runs in CO mode or if a humidity level has been set, press up or down arrow
button once. The display will either indicate CO or the set humidity level for 2 seconds, after which it will display the room
humidity level.
NOTE:
1. In the laundry setting, the humidity reading display will show the room humidity level and this cannot be changed as the
unit will be running in the continuous dehumidification mode.
2. In the Child Lock setting, LC will be shown in the humidity reading display.
ANSIO 1539 (J21v01)
Customer Support - UK Toll Free 0800 080 6781; +44 207 157 9795
5