Foxpro HELLCAT TX433XL Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Спікери Foxpro HELLCAT TX433XL. Foxpro HELLCAT TX433XL 16 сторінок.
Також для Foxpro HELLCAT TX433XL: Інструкція з експлуатації (20 сторінок)
Друкувати сторінку2-6 Built in Decoy Operation
The Hellcat comes standard with a built-in Decoy. This decoy can be controlled from the TX433XL remote
control. The 1 button on the remote control is preprogrammed from FOXPRO to start and stop the motion
of the decoy. To start the decoy, simply press the 1 button. To stop the decoy, press the 1 button again.
The built in decoy features our blue bird topper. If you desire additional or different toppers, they are
available by visiting the FOXPRO website at www.gofoxpro.com.
3. Auxiliary Jack Function
The AUX jack is used primarily for the remote control of FOXPRO decoys and may be suitable for controlling
other similar devices. It is NOT intended for the direct control of motors, flashlights, or other devices
requiring the internal AUX jack circuitry to switch more than 50 milliamps. The jack tip polarity is positive.
Do not exceed 15 volts. We urge you to seek help from a knowledgeable professional before connecting any
unapproved device to the jack. Keep in mind that any damage to the FOXPRO caller as a result of improper
use of the AUX jack is not covered by the warranty, nor will FOXPRO be liable for damage to any connected
devices.
Please note: If you add an external decoy and attach it via the Auxiliary Jack, both decoys will be controlled
at the same time. It is recommended that if you are connecting a second decoy, make sure that the caller is
turned off when connecting the decoy so that both decoys will be in sync. Connecting the decoy with the
caller turned on can cause the decoys to get out of sync.
4. TX433XL Transmitter Detailed Information
This section covers the TX433XL in detail including breakdowns and explanations of each menu item.
4-1 Primary Display Area
When powered on, the TX433XL briefly displays a startup screen (firmware version) and then gives a
message to extend antenna completely for best remote control range. Depress the "Play/Select" button to
get to the primary display area (see image above). The "Favorites" menu item holds your 25 favorite
sounds. Below "Favorites" are your various sound categories. The bottom line of the display is a status bar
that shows (in order): current volume level, mute status, battery level, and elapsed timer. You navigate
through the screen with the "Scroll Up" and "Scroll Down" buttons. As you scroll, the black highlight bar
moves up and down, respectively. To select a menu item, push the "Play/Select" button. To move back to
the previous screen after making a selection, use the "Menu" button.
4-2 Main Menu
The main menu provides access to a variety of transmitter configurations. To access the main menu, push
the "Menu" button a single time. The available menu options are as follows: "Sound Settings,"
"Display/Power," "Timer/User," and "Remote Settings." The following sections cover each of these menu
items and their sub-menu items in detail.
8