DSC PC5928 Посібник із швидкого старту - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Блок управління DSC PC5928. DSC PC5928 16 сторінок. Audio interface module
Також для DSC PC5928: Інструкція користувача (2 сторінок)

Друкувати сторінку

5.8

Listen To All

When the PC5928 enters the Talk/Listen-In mode, it can be programmed to initiate in one of

two ways. If the Listen "To All stations While On Line" option is enabled, all stations will turn

on. If the option is disabled, only the stations that are in alarm will turn on. This option only

affects how the PC5928 initiates the Talk/Listen-In session. All stations remain accessible

through use of the telephone command keys.

All zones follow this functionality regardless of their definition.

Listen To All Stations When On Line...................Section [30], Option [2]

5.9

Page Listens To All

Enabling this feature will allow all stations which hear pages to respond without answering. If

the page is answered by pressing the Page/Answer button, normal page activity will take

place. If the page is not answered, it will time out after 30 seconds.

Page Listens To All...................Section [30], Option [3]

5.10

Doorbell Listens To All

Enabling this feature will allow all stations which hear doorbell pages to respond without

answering. As well, visitors initiating the doorbell page will be heard on all other stations which

hear pages. If the doorbell page is answered by pressing the Page/Answer button, normal page

activity will take place. If the doorbell page is not answered, it will time out after 30 seconds.

Doorbell Listens To All...................Section [30], Option [4]

5.11

Telephone Ring Mask

Any station type can be enabled to sound a ringing tone when an incoming call is detected.

If the Telephone Ring Mask is disabled for a station, the ringing tone will not sound, but the

telephone call can still be answered.

The telephone ring mask overrides the general broadcast mask.

Telephone Ring Mask...................Section [60]

5.12

Doorstrike Activation Mask

There may be situations when a station should not activate the doorstrike feature. If the

Doorstrike Activation Mask option is disabled for a station, it will not be able to activate the

doorstrike feature.

The Doorstrike Activation Mask should not be enabled for stations programmed

as Doorbox 1 or Doorbox 2.

Doorstrike Activation Mask...................Section [70]

5.13

Doorstrike Option PGM Programming

This section is used to program which PGM type will be activated on the PC5010 when the

doorstrike feature is used.

Doorstrike PGM Option Programming...................Section [72]

firealarmresources.com