DSE DK-V2-4G Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Цифрова камера DSE DK-V2-4G. DSE DK-V2-4G 4 сторінки. Camera and video recorder car black box with 4g
Друкувати сторінку
USER MANUAL
At the bottom of the screen you see the GPS map or you can switch
to a second page that allows you to view the recorded files and set
some camera options
In order not to burden the server, the real-time video connection
via web has a timing that automatically closes it in the absence of
operator commands.
Options configuration
These are the operating options that you can configure in the menu
CHANGE PASSWORD - You can change the name and password of
the camera's wifi network
COLLISION SENSITIVITY - You can adjust the sensitivity of the
internal collision detector (G-Sensor) which is used by the camera to
freeze images in the event of an accident or to detect an impact in
parking surveillance.
DSE srl - Digital Surveillance Equipment – www.dse.eu
Document:DK-V2-4G 2B3
DK-V2-4G Dash Cam Car Camera
ALARM ON COLLISION – Enables the surveillance function while
parking. When the vehicle is off, the camera goes into Stand-By
(Sleep) mode and activates automatically if the vehicle is hit. LOCK
COLLISION IMAGES – If you enable this function the camera will
protect the video before and after a collision from overwriting to
save the images of the accident.
SILENCE – Disable audio in recording GPS WATERMARK – If enabled,
it overlays the GPS coordinates on the video.
REAR MIRROR – Mirrors the rear camera image.
RESTART RECORDING – Restart the DVR and apply any changes in
the video recording
FORMAT SD CARD – Format the SD card deleting its contents.
FACTORY RESET – Restore the factory settings.
Reproduction
Recordings are accessed with the File Recorder button or with the
ALBUM icon.
The recordings section is divided into 4 folders where they are
saved respectively from left to right
- IMPORTANT FILES PROTECTED BY PRESSING THE CAMERA
BUTTON ON THE CAMERA
- IMPORTANT FILES PROTECTED FROM OVERWRITE BY
COLLISION SENSOR
- CONTINUOUS RECORDING FILES
- FILES DOWNLOADED ON THE PHONE
To download the videos from the camera and save them in your
phone press and hold the file icon for a few seconds.
User
The user section is accessed with the IO button. It is possible to
review the route stored by the GPS.
Use of the CMSV6 fleet management app and software
The camera you have purchased includes a one-year subscription to
the CMSV6 fleet management platform. IP address, user name and
password to access the platform are sent to you via email.
CMSV6 is a very powerful web-based fleet management platform
with many advanced features that you can use instead of the free
CloudDVR app. It is very useful especially for the management of
fleets of vehicles when many dashcams have to be monitored at the
same time.
You can download the CMSV6 software from our website and the
CMSV6 app or also CMSV7 (new version) from the iOS and Android
stores.
You can also use CMSV6 with our dashcams simply with a browser
by connecting to the IP address http://47.241.210.146/
For the use of CMSV6 refer to the specific manual.
Page: 4