DSPPA PAVA9008E Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Мікрофон DSPPA PAVA9008E. DSPPA PAVA9008E 5 сторінок. Remote paging microphone/expansionkeyboard

2—Equipment "Busy" Indicator

 When the indicator light is on, the equipment is busy, and please wait.

3—Microphone Rod Connector

 When the LED indicator of the microphone is red, it indicates that it is allowed for paging.

Note:

4—Paging Activation Button

 MIC paging control button.

Notes:

①. After selecting zones, press this button to start paging (speaking is allowed after the microphone indicator is on).

②. When paging, press this button to end the current paging.

③. When the MIC is working in PPT mode, it is required to keep pressing this button for paging, otherwise the paging

will be ended (please refer to the instructions on the rear panel for PPT mode).

④. If no zones are selected, paging cannot be activated.

5—Zone/Group Selection and Working Status Indicator

 Green - The button function has been executed.

 Off - The button function has ended.

 Flashing - Indicates that the zone is currently selected by the user.

6—Remarks on Zone/Group Information

 The zone/group information remarked by the user, such as the current zone name and group number.

7—Select All Button

 When the MIC is not paging,

①. If all zones are flashing, press this button to cancel the selected state of all zones.

②. If only some of the zones are selected, press this button to select all zones, and press this button again to cancel

the selected state of all zones.

 When the MIC is paging,

①. When it is working in zone mode,

a. If all zones are normally on, press this button to cancel the selected state of all zones.

b. If only some of the zones are selected, press this button to select all zones, and at this time up to 16 zones can be

selected.

②. When it is working in group mode,

c. If all groups are normally on, press this button to cancel the selected state of all groups.

d. If only some of the groups are selected, press this button to select all groups, and at this time up to 16 groups can

be selected.

8—Zone/Group Selection Button

 When the MIC is not currently paging and the LED indicator is off, press the corresponding button, and then the

corresponding indicator light will be flashing, indicating that the corresponding zone is selected.

 When the MIC is currently paging and the LED indicator is normally on, press the corresponding button, and then

the corresponding indicator light will go out, indicating that the corresponding zone is deactivated.

9—Power Indicator

www.dsppatech.com

The specifications will be subject to change without prior notice.