ATTIAS USA-60 Встановлення та експлуатація - Сторінка 3

Переглянути онлайн або завантажити pdf Встановлення та експлуатація для Міксер ATTIAS USA-60. ATTIAS USA-60 11 сторінок. Commercial dough mixers

UNPACKING

Immediately after unpacking the mixer, check for possible damage. If this machine is

found to be damaged after unpacking, save the packaging material and contact the

carrier with in 15 days of delivery.

Prior to installation, test your local electrical service to assure that it agrees with the

specifications on the machine plate. Call Attias with any questions.

LOCATION

Place the mixer in its operating location. There should be adequate space around the

mixer for the user to operate the controls and install and remove bowls. The area above

the mixer should allow the top cover to be removed for routine maintenance and

servicing.

This mixer is shipped with oil in the transmission and planetary. Check oil levels before

starting mixer. Refer to LUBRICATION, for applicable lubrication procedures.

WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST

COMPLY WITH THE APPLICABLE PORTION OF THE NATIONAL

ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A

TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE

WORKING ON THE CIRCUIT.

Model

Volt/Hz/Ph

USA60

208/220/240

USA80

208/220/240

INSTALLATION

ELECTRICAL DATA

Phase

Single or 3 Phase

*available in 50 cycles for overseas*

Single or 3 Phase

*available in 50 cycles for overseas*

Cycle