AddEnergie SmartTWO Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Зарядний пристрій AddEnergie SmartTWO. AddEnergie SmartTWO 20 сторінок.
Також для AddEnergie SmartTWO: Посібник із швидкого старту (4 сторінок)
Друкувати сторінкуSpecifications
EVSE type: Level 2
Output connector: SAE J1172 compliant
Split Phase 120/240 VAC Supply or 3 phase 120/208 VAC (must be protected by a 40 A fuse or circuit breaker)
Maximum output power: 7.2 kW @ 240 VAC or 6.3 KW @ 208 VAC
Built-in protection against overvoltage conditions and leakage current to ground
Ingress Protection rating: Certified NEMA3R enclosure, suitable for outdoor use
Shipping weight: Approximately 30 kg for the single pedestal configuration
Patent: US 9,421,878B2
Security standard compliance:
• CSA C22.2 No. 0-10 General Requirements – Canadian Electrical code, part II
• CSA 281.1-12/UL2231-1 Standard for safety for personnel protection systems for electrical vehicle
(EV) supply circuits: General requirements
• CSA 281.2-12/UL2231-2 Standard for safety for personnel protection systems for electric vehicle (EV)
supply circuits: Particular requirements for protection devices for use in charging systems
• CSA C22.2 No. 280-13/UL2594 (1st edition) Electric vehicle supply equipment (EVSE)
© 2019 ADDÉNERGIE TECHNOLOGIES INC. ALL RIGHTS RESERVED Information and specifications contained in this document are subject to change, amendments and additions at any time, without notice
Model: SmartTWO
TM
Revision: V4
Company Info: AddEnergie Technologies Inc.
Document revision number: V20-2019-04-03
© 2019 AddÉnergie Technologies Inc. All Rights Reserved. AddÉnergie
Technologies Inc. reserves the right to alter product offerings and
specifications at any time without notice and is not responsible for
typographical or graphical errors that may appear in this document. All
pictures shown are for illustration purposes only. Actual product may vary
due to product enhancements.
4