ATZ HDMI4K Plus VGA-EM100IR-RX Посібник - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник для Приймач ATZ HDMI4K Plus VGA-EM100IR-RX. ATZ HDMI4K Plus VGA-EM100IR-RX 13 сторінок. Hdmi4k/vga over ip receiver with ir, rs-232, poe/ lan & usb/kvm extension

Друкувати сторінку

Model

: ATZ HDMI4K+VGA-EM100IR-RX

Description: HDMI4K/VGA over IP Receiver with IR, RS-232, PoE/ LAN &

USB/KVM Extension

sight of the IR Extender.

(11) IR OUT: Connect to the provided IR Blaster to transmit IR signals from the

associated Transmitter to devices within direct line-of-sight of the IR Blaster

(12)

ISP SEL: For Factory use only. By default this is set to the left (away

from the RS-232 port) and allows normal RS-232 functionality. Setting this switch

to the right enables ISP engineering mode.

(13)

RS-232: Connect directly to an RS-232 controllable device to receive commands

from the device connected to the Transmitter. The baud rate is configurable, but the

default baud rate is 115200.

Note: When the Transmitter is in multicast mode every connected Receiver unit

can send RS-232 commands to the Transmitter and commands sent from the

Transmitter side will be sent to all connected Receivers.

pg. 9

Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.

Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time

All specifications are subject to change without prior notice.