Abstract Data Event Boss ADE-33 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління Abstract Data Event Boss ADE-33. Abstract Data Event Boss ADE-33 16 сторінок. Rhythm and pattern creation and manipulation

Друкувати сторінку

5) Inputs & Outputs

1) IN: MODE SELECT/COUNT RESET

Mode Select

Count Reset

2) IN: GATE A1/A2 SELECT

Use an Event signal to cycle or jump between IN: GATE A1 and IN: GATE A2.

See Page 6 for more information on GATE A1/A2 SELECT Button Edit Mode for setting the CV

options for this input.

3) IN: GATE A1

Event signal input A1 for all Local Modes.

4) IN: GATE A2

Event signal input A2 for all Local Modes.

5) IN: GATE B/CV

Input B for High (+5V) or Low (0V) signals or CV (0-5V) signals depending on Global Mode.

6) OUT

High (+5V) or Low (0V) output for all Local Modes.

• Use an Event signal e.g. a clock, gate, trigger, square-wave or PWM-type

LFO to cycle through Local Modes or a variable 0-5V CV source to jump

across Local Modes.

• Use Event signals to access specific options for each Local Mode.

• See Page 6 for more information on MODE SELECT Button Edit Mode

for setting the CV options for this input.

Page 5 of 13

Version 1.0.1