DAN NTP TECHNOLOGY DAD Thunder Core 256 Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з монтажу для Обладнання для запису DAN NTP TECHNOLOGY DAD Thunder Core 256. DAN NTP TECHNOLOGY DAD Thunder Core 256 16 сторінок. Thunderbolt 3, dante, madi and adat digital audio interface
Друкувати сторінкуInstallation Guide Core 256
Operation
Core 256 is controlled from a Mac or Windows computer via the Thunderbolt connection or the Ethernet port on
the rear panel and configured by the DADman software running on the computer. On the front panel, you can
monitor some of the primary settings.
Front panel layout
1.
DAD Logo. Indicates that the unit is turned on and flashes while it is in standby (off)
2.
On/Standby button. Note that the unit automatically returns to the latest power state (on or standby)
if it is power cycled via the mains power.
3.
External sync source two-color indicator. Green LED shows that external sync source is OK, red LED
indicates that there is an insufficient sync signal.
4.
Internal sync indicator. Green LED shows internal or external sync source.
5.
Error indicator: Red LED. Indication is related to hardware performance and can be triggered by
temperature overload, fan error, DAD I/O card failure or general internal boot error. A more specific
error indication will be visible in DADman.
Doc no. AXCNTR-8001-A-4
Figure 6, Front panel layout
Rev. date 201123
Page 11 of 16