Duerkopp Adler 743-121 Інструкція з експлуатації Посібник з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Швейна машина Duerkopp Adler 743-121. Duerkopp Adler 743-121 14 сторінок.
Також для Duerkopp Adler 743-121: Інструкція з монтажу Посібник з монтажу (7 сторінок)
Друкувати сторінку
2.7 Setting the Insertion Depth of the Folding Table
1
4
12
The first stitch of the needle into the material should occur as close as
possible to the front edge.
In order to achieve a uniformly slim dart point with differing material
thicknesses, the machine is equipped with a fine adjustment.
7 different insertion depths can be set with the stops 4.
Caution Risk of Injury !
Turn the main switch off.
The insertion depth may only be set or changed with the sewing unit
turned off.
Setting the insertion depth
–
Release lever 3.
–
Push the folding table a bit forward on the guide.
–
Set one adjusting screw 4 ( 7-off ) to the desired insertion depth.
–
Turn setting knob 2 to the desired insertion depth ( stop ).
–
Push the folding table to the back on the guide again.
The adjusting screw 4 must firmly touch the stop 1.
–
Tighten lever 3 again.
Changing the insertion depth
–
Release lever 3.
–
Push the folding table a bit forward on the guide.
–
Turn setting knob 2 to the desired insertion depth ( stop ).
–
Push the folding table to the back on the guide again.
The adjusting screw 4 must firmly touch the stop 1.
–
Tighten lever 3 again.
3
4