Duerkopp Adler 743-121 사용 설명서 - 페이지 10

{카테고리_이름} Duerkopp Adler 743-121에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 743-121 14 페이지.
Duerkopp Adler 743-121에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (7 페이지)

페이지 인쇄

2.7 Setting the Insertion Depth of the Folding Table

The first stitch of the needle into the material should occur as close as

possible to the front edge.

In order to achieve a uniformly slim dart point with differing material

thicknesses, the machine is equipped with a fine adjustment.

7 different insertion depths can be set with the stops 4.

Caution Risk of Injury !

Turn the main switch off.

The insertion depth may only be set or changed with the sewing unit

turned off.

Setting the insertion depth

–

Release lever 3.

–

Push the folding table a bit forward on the guide.

–

Set one adjusting screw 4 ( 7-off ) to the desired insertion depth.

–

Turn setting knob 2 to the desired insertion depth ( stop ).

–

Push the folding table to the back on the guide again.

The adjusting screw 4 must firmly touch the stop 1.

–

Tighten lever 3 again.

Changing the insertion depth

–