Duerkopp Adler 743-121 사용 설명서 - 페이지 12

{카테고리_이름} Duerkopp Adler 743-121에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 743-121 14 페이지.
Duerkopp Adler 743-121에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (7 페이지)

페이지 인쇄

2.9 Positioning the Sewing Pieces

2.10 Sewing

–

Mark the dart depth on the fold plate 1 with thinnest possible

smooth adhesive tape.

–

Place the sewing piece over the edge of the fold plate with both

hands.

–

Bring the cut edges together with the right hand so that the edges

match.

–

Align the small hole for the dart length precisely at the back edge

of the fold plate.

–

Hold the material in place at the front edge with the right hand and

push in the fold plate.

The material is held in place by the configuration set.

The fold plate runs to the back.

The sewing procedure is carried out.

After the main switch is turned on or the

" STOP " button is pushed, the microcomputer checks the initial

settings of the machine.

The needle is brought to its initial position.

If no fault is found the " <--- REF ---> " or "

appear.

This means that the configuration set must be run to the reference

point.

Press the "

" button.

The configuration set travels to the reference point.

Starting sewing

–

Insert material.

–

Push in the folding table with the material.

The sewing cycle starts.

CAUTION !

Do not push in the folding table without material !

The friction surface of the configuration set could be damaged.

REF ---> " display will