Duerkopp Adler 743-121 사용 설명서 - 페이지 11
{카테고리_이름} Duerkopp Adler 743-121에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 743-121 14 페이지.
Duerkopp Adler 743-121에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (7 페이지)
페이지 인쇄
2.8 Setting the Controls
The setting of the controls is explained in detail in Part 4: Microcontrol
Summary !
At this point only those settings necessary for the sewing procedure
are listed.
Turn main switch on !
The programming of the controls occurs with the main switch turned
on !
The machine is not to be started unintentionally.
–
Set the " Program " switch to " 01 " or " 02".
The sewing program is selected.
–
Push the " STOP " button.
The sewing program is activated.
–
Setting the seam length.
Press button " L1 "or " L2 " or " L3 ".
Set the desired value with the " + " or " - ".
Establishing the seam length with the light barrier.
Press the button.
–
Setting the soft start.
Press the button.
The diode is lit when the function is selected.
–
Setting stitch condensing at the seam beginning.
Press the button.
The diode is lit when the function is selected.
–
Setting stitch condensing at the seam end.
Press the button.
The diode is lit when the function is selected.
–
Setting the remover.
Press the button.
The diode is lit when the function is selected.
–
Setting the blower from the top or to the right.
Press the button.
Pressing the button repeatedly switches between the functions
"top/right/off".
The left diode is lit when the function
" Blower from the top " is selected.
The right diode is lit when the function
" Blower from the right " is selected.
–
Setting the normal stitches and the stitch condensing.
Press the button.
The left line of display indicated the number (0 to 20) of regular
stitches up to the stitch condensing.
Set the desired value with the " + " or " - ".
Press the button.
The right line of display indicated the number (0 to 8) of
condensed stitches.
Set the desired value with the " + " or " - ".
Press the button. (The engagement is finish.)
The controls are now completely set.
13