Addictive Desert Designs Bomber Інструкція з монтажу Посібник з монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні аксесуари Addictive Desert Designs Bomber. Addictive Desert Designs Bomber 10 сторінок. Front bumper for 2017-current ford superduty

Друкувати сторінку

ADDICTIVE DESERT DESIGNS® ®

ADDICTIVE DESERT DESIGNS

16. If you have a lift kit with a sway bar bracket similar to what is pictured, loosen the sway bar bracket, slide

the bumper bracket into place, then tighten the sway bar bracket so that the sway bar bracket sandwiches the

bumper bracket between it and the frame as shown. (Fig M)

Fig M

17. Set the bumper in place on the vehicle. Install the supplied 1/2" Black Button Head Bolts (1 per side), 1/2"

Black Washers (1 per side), and 1/2" Black Lock Nuts (1 per side) on the outer/lower mounting holes of the

frame horns. Then, install the supplied 3/8" Hex Head Bolts (2 per side) and 3/8" Fender Washers (2 per side)

from the back side of the frame horns. Leave these bolts loose for now. (Fig N)

Fig N

Addictive Desert Designs® | Page 8

2017-Current Ford SuperDuty

Bomber™ Front Bumper Installation Instructions

Sandwich the bumper bracket

between the frame and the sway

bar bracket.