3rd Power Dream Weaver 112 Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач 3rd Power Dream Weaver 112. 3rd Power Dream Weaver 112 15 сторінок. Combo & head
B A C K P A N E L :
23
HybridMASTER-PLUS™ (23)
The HybridMASTER-PLUS system allows you to set the overall volume level of the amplifier in-
dependent of the volume and tone settings established on the front panel. The system consists
of a "venue" switch and the HybridMASTER control. Use the switch to toggle between full scale
output and an approximate 80% reduction in volume. Use the HybridMASTER control to fine
tune your volume levels.
Effects Insert (24)
The EFFECTS INSERT of the DREAM WEAVER is designed to allow you to insert an effects device
(most often, time-based effects like delay or reverb) after the preamp and before the power amp.
When no effects device is present, this circuit is completely bypassed to deliver a direct signal
path between the preamp and power amp stage. For best results, utilize professional type effects
processors with at least +15dBu input sensitivity.
OPERATION NOTES:
• This is a line-level effects insert that is best suited for professional rack-
mount effects devices capable of handling up to 4.5Vrms.
• Best performance is achieved by minimizing patch cable length.
• When cable runs are over 5 - 10 feet it may be beneficial to use an exter-
nal effects buffer device on the SEND connection.
24
10